2.4GHz Wireless Radio for use with IP based receiving and transmitting video signals. This unit can be connected to a wired IP camera to make it wireless or can be mounted as an extension to an existing wired network to broadcast the network via WiFi to a wireless IP camera.

If you are experienced with networking, you can program the radio to work with your existing network. If you require network configuration assistance then our Hands on Networking Support can be purchased for each device you would like us to configure.

This wireless access point offers 25+ Mpbs real throughput and up to 1 mile range in clear line of sight when used with another identical MIMO wireless AP. It features 2×2 MIMO technology, this new wireless radio links significantly faster and farther than ever before. New antenna array designs featuring 11dBi at 2.4GHz. Secondary ethernet port with software enabled PoE output for seamless integration with a PoE IP Camera. Remote hardware reset circuitry allows for device to be reset remotely in case of a stall or hang-up, or you can utilize the built-in watchdog feature to reboot the radio in case of failure of network transmission.

Features

• 2.4GHz Wireless AP with MIMO technology
• Converts wired IP camera to wireless IP
• Compatible with wireless NVR
• Up to 15km range with clear line of sight when used with identical unit as receiver
• Compatible with 2.4GHz 802.11 b/g/n wireless devices
• Great for use long range infrared wireless ip camera
• Can be used as receiver on an existing wired network
• Up to 2000ft working range with continuous video transmission
• Support up to 2 wireless video signals at 2MP or higher resolution

Includes

• (1) Wireless IP Based Radio
• (1) Power Adapter