16 Channel Passive Video Balun Receiver & Power Supply Hub

  • 16 Channel Video Balun Receiver with Power
  • For use with Video Power Baluns
  • Video & Power for 16 CCTV Cameras
  • Supports 1080P, 720P, CVBS
  • 110V AC Powered
  • Description

    16 Camera Video Balun Receiver with Power Distribution capabilities, allows for video and power transmission to analog cameras using CAT5e or CAT6 cable with our video power baluns. This 16 channel passive video power balun hub allows you to consolidate your power supply into one source as opposed to 16 individual power adapters, or using a separate video balun hub and CCTV power distribution box.

    Possible system setups:

    Method 1: Direct connection to video balun and DVR
    Connect DVR directly to the BNC video outputs on the receiver, and run network or UTP twisted pair cable to camera location (and terminate with passive video power baluns. Note max 12V DC power distance is 750ft for this type of video/power balun hub, depending on power consumption of the camera being used.


    Method 2: Relay method
    Use this video power balun hub as a relay point between a camera and 16 channel video balun receiver that is active or passive (only works with identical units). You can use this hub up to 750ft away from a video power balun connected to a camera to carry both video power signals. Video signals from up to 4 cameras can be retransmitted or relayed using a single RJ45 port labeled “4 in 1” to another multi-channel video balun receiver. This relay method allows the user to transmit video up to an additional 1300ft (CVBS) from this hub. This method is very useful in scenarios where several camera signals need to be consolidated to make wiring neater for large business installations with long cable runs.




    Transceiver Type 16 CH Passive Video Balun Receiver & Power Supply Hub (VPS)
    Video/Power Inputs 16 x RJ45
    Video Output 16 x BNC for connection to DVR, 2 x RJ45 for relay to multi-channel balun receiver
    Video Frequency Response Range: DC-5MHz;  Common-Mode / Differential-Mode rejection: 5KHz-5MHz 60dB type
    Compatible Wire Type 24-16AWG UTP CAT5 or higher; DC loop resistance <= 18Ω/ 100m; Differential capacitance: 62pF/m (max)
    Impedance UTP or Connection or RJ-45: 100Ω;  BNC Coax:75Ω
    Power Input 110V AC
    Power Output 12VDC 1.06 Amp (Total 8.5 Amp)
    Power Transmission 12V DC up to 750 ft Via UTP CAT5e or CAT6 Solid Copper
    Dimensions 19.4″ x 6.7″ x 1.8″
    Weight 7.1 lbs